Plastic electronics could slash the cost of solar panels
A new technique developed by Princeton University engineers for producing electricity-conducting plastics could dramatically lower the cost of manufacturing solar panels.
By overcoming technical hurdles to producing plastics that are translucent, malleable and able to conduct electricity, the researchers have opened the door to broader use of the materials in a wide range of electrical devices.
With mounting concerns about global warming and energy demand, plastics could represent a low-cost alternative to indium tin oxide (ITO), an expensive conducting material currently used in solar panels, according to the researchers.
“Conductive polymers [plastics] have been around for a long time, but processing them to make something useful degraded their ability to conduct electricity,” said Yueh-Lin Loo, an associate professor of chemical engineering, who led the Princeton team. “We have figured out how to avoid this trade-off. We can shape the plastics into a useful form while maintaining high conductivity.”
A multi-institutional team reported on its new technique in a paper published online March 8 in the Proceedings of the National Academy of Sciences.
The area of research, known as "organic electronics" because plastics are carbon-based like living creatures, holds promise for producing new types of electronic devices and new ways of manufacturing existing technologies, but has been hampered by the mysterious loss of conductivity associated with moldable plastics.
“People didn’t understand what was happening,” said Loo, who co-wrote the paper. “We discovered that in making the polymers moldable, their structures are trapped in a rigid form, which prevented electrical current from traveling through them.”
Once they understood the underlying problem, Loo and her colleagues developed a way to relax the structure of the plastics by treating them with an acid after they were processed into the desired form.
Princeton researchers have developed a new way to manufacture electronic devices made of plastic, employing a process that allows the materials to be formed into useful shapes while maintaining their ability to conduct electricity. In the plastic transistor pictured here, the plastic is molded into interdigitated electrodes (orange) allowing current flow to and from the active channel (green). (Image: Loo Research Group)
Using the method, they were able to make a plastic transistor, a fundamental component of electronics that is used to amplify and switch electronic signals. They produced the electrodes of the transistor by printing the plastic onto a surface, a fast and cheap method similar to the way an ink-jet printer produces a pattern on a piece of paper.
Loo said the technique potentially could be scaled up for mass production presses akin to those used to print newspapers. “Being able to essentially paint on electronics is a big deal,” Loo said. “You could distribute the plastics in cartridges the way printer ink is sold, and you wouldn’t need exotic machines to print the patterns.”
By allowing plastic solar cells to be manufactured using low-cost printing techniques and by replacing ITO as the primary conducting material, the plastics the team developed hold potential for lowering the cost of solar panels.
Currently, the electricity generated by plastic solar cells is collected by a transparent metal conductor made of ITO. The conductor must be transparent so that sunlight can pass through it to the materials in solar cells that absorb the light energy.
A rare and pricey byproduct of mining, ITO had come under increasing demand for use in flat-screen televisions, mobile phones and other devices with display screens. “The cost of indium tin oxide is skyrocketing,” Loo said. “To bring down the costs of plastic solar cells, we need to find a replacement for ITO. Our conducting plastics allow sunlight to pass through them, making them a viable alternative.”
The researchers anticipate that the plastics also could replace expensive metals used in other electronic devices, such as flexible displays. In addition, the scientists are beginning to explore the use of the plastics in biomedical sensors that would display a certain color if a person had an infection. For instance, the plastics turn from yellow to green when exposed to nitric oxide, a chemical compound produced during ear infections in children.
If the devices could be produced at a low cost, they might be useful in developing countries that lack advanced medical facilities. “You wouldn’t need any fancy machines or lab equipment to diagnose an infection,” Loo said, “all you would need is your eyes to see the color change in the plastics.”
The co-authors of the paper were Joung Eun Yoo, who received her doctorate in chemical engineering from the University of Texas-Austin in 2009 with Loo as her adviser; Kimberly Baldwin, a high school student who spent a summer in Loo's lab; Jacob Tarver, a Princeton chemical engineering graduate student; Enrique Gomez of Pennsylvania State University; Kwang Seok Lee and Yangming Sun of the University of Texas-Austin; Andres Garcia and Thuc-Quyen Nguyen of the University of California-Santa Barbara; and Hong Meng of DuPont Central Research and Development.
The research was supported by the National Science Foundation, the W.M. Keck Foundation and the Arnold and Mabel Beckman Foundation.
- Dean's Message
- Art of Science 2010 gallery opens at Friend Center and online
- Andlinger plans blend technical, aesthetic goals for new energy research hub
- For Princeton valedictorian Karp, success is built upon teamwork
- Engineers turn noise into vision
- Scientists find an equation for materials innovation
- Name change highlights links between engineering and biology
- Princeton-led center focuses on the future of computer system design
- Plastic electronics could slash the cost of solar panels
- Energy-harvesting rubber sheets could power pacemakers, mobile phones
- Engineers and architects develop disaster relief technologies for Haiti
- Physics insight sparks photo-editing innovation: ‘Content-Aware Fill’ in Adobe Photoshop
- Finding good ideas at the nexus of computers and sociology
- Project X: Innovation fund supports bold thinkers and 'tinkerers'
- Em[Power] plans an escape from severe poverty
- Forum drives University innovations toward marketplace
- Entrepreneurial Princeton
- Faculty Awards
- Students honor professors, grad students for excellence in teaching
- Two esteemed faculty transfer to emeritus status
- Connecting art and engineering in Streicker Bridge critique
- Undergraduate Awards
- Mixer connects grad students and alumni
- Bezos ’86 emphasizes the power of choice to graduates
- Engineering After Princeton: Harari and Toppin on innovation
- Winter 2010